Kotinos

本页保存的是公开项目资料快照，阅读过程不需要连接 GitHub。

Kotinos: Finger tip shell mod for HSK Pro

图片：Main

STLs are provided, but if you wish to modify them you can edit the SCAD files. Additional BOSL2 library is required.

This project is open sourced with the GPL-3.0 license. The license conditionally allows for commercial use, modification, distribution, patent, and private use. Please take note of the license conditions before utilizing this project.

BOMs

	Part Name	Part Description	Quantity	Source
1	Husk Pro	Mouse	1	G-Wolves
2	Kotinos	Main Shell	1	3D Print Kotinos.stl
3	Index Paddle	Paddle for Right Mouse Button	1	3D Print IndexPaddle.stl
4	Middle Paddle	Paddle for Left Mouse Button	1	3D Print MiddlePaddle.stl
5	IDC Female Connector	1.27mm pitch Mini dual rows IDC FC 10 pins Female	1	amazon
6	IDC Male Connector	1.27mm pitch Mini dual rows IDC FC 10 pins Male	1	amazon
7	Ribbon Cable	3cm length of 0.635mm pitch flat ribbon cable	1
8	M1.4 3mm	Thumb PCB Mount	3
9	M1.4 3mm wide head	Mounting Sensor PCB, Index PCB, and Paddles	8	HSK Pro
10	6~7mm Skates	circular mouse skates	7

Assembly Instruction

• Disassemble HSK Pro: Battery, side button PCB, encoder + buttons PCB, Sensor PCB and harvest ~8 screws
• Encoder wheel tends to slide off due to the tent angle; apply a dab of superglue on the wheel axis to fix it in place. 图片：PCBs
• Attach the side PCB to the shell first: use M1.4 3mm narrow head on the center post, M1.4 3mm narrow head near the notch and on the far corners 图片：Thumb PCB
• Next is the sensor PCB: attach the jumper first, then slide it on to the shell and secure it with 2 M1.4 wide heads 图片：Jumper old 图片：Side
• Attach the index PCB: first, secure the top 4 mount points with M1.4 wide heads. Attach the jumper then secure the paddles. 图片：Index Mound 图片：Jumper2 图片：Paddles
• Finally, plug in the side PCB jumper and the battery. You can slide in battery between the shell to secure it. 图片：Back Shot

Customization

Edit the following files to suit your need

• DataHand.scad stores the hand measurement that dictates the paddle placement
• DataFingerPaddle.scad for paddle surface modification
• MainBuild.scad to render modules and edit module placements 图片：Preview